Blood Bank chamber is a most versatile unit for Blood Bank mounted on a sturdy angle frame. The inner chamber is made up of stainless steel sheet and outer of mild steel sheet duly powder coated paint. Caster wheels provided for easily mobility. The temperature is maintained in 4° C to 6° C with forced air circulation ensures uniform temperature, for storing blood bottles or blood bags. Temperature is controlled by Microprocessor PID digital temperature controlled-cum-indicator and triggers the AUDIO VISUAL ALARM in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with DOOR OPERATED ALARM and POWER SUPPLY FAILURE ALARM, as safety devices. A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature. The entire refrigeration unit is housed at bottom. Two doors are provided. Inner door is of transparent acrylic sheet for easy viewing inside the chamber. Outer door is duly insulated for proper sealing from external environment and is lockable. Drawers are provided for holding bags. Suitable to works on 220/230 volts A.C.

Vaccine storage cabinet, the most versatile unit for vaccine storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frame. Insulated thoroughly provided with face fitting doors, complete with self- closing hinges lockable fasteners. Cabinet is fully sealed to avoid spilling and contamination from external environment. Temp. ranges from 4° C to 6° C. Available in various sizes for keeping vaccines bottles. Drawers with clear Perspex fronts and index card holders. Temp. Controlled and displayed by Microprocessor PID digital temperature controlled-cum-indicator. Audio visual alarms are triggered, in the event of fluctuations exceeding permitted tolerance level. Suitable to work on 220 V, single phase, 50 Hz, AC supply.

Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20°C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with solid State Digital Temperature Indicator-Cum-Controller. Horizontal Chest type models are supplied in a single compartment where as vertical models are supplied with three stainless steel storing shelves.

Humidifier is basically an Atomizing Humidifier of splash plate rotating disc type. Designed to give relative humidity as high as upto 95% RH in enclosed areas. Humidifier is a portable unit body made of Aluminium/Stainless steel. Capable of atomizing up to three liters of water in an hour at full evaporation in the driest possible ambient conditions. Provided with automatic flout valve assembly to work on 220V AC.

(Fitted with time controlled safety device in, case humidity controller fails, for safety of the compressor). These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes excess moisture from the atmosphere and is fitted with hermetically sealed compressor. Heat exchanger and water condensing coils are made of copper. Water collection tank is provided below the unit to collect condensate water. Humidity is controlled by HUMIDITY CONTROLLER incorporated in the unit, up to 30% ± 3% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have a independent window type Air conditioner to much with the dehumidifier heat load in the room. Suitable to work on 220/230 volts A.C. supply.