I feel that I have always received an excellent service from the Bluefic team. The most impressive thing was the turnaround time and also your willingness to be flexible.
Dr. V. Jaissy
South Affrica
We like your product! It's handy, easy to use, and nice and lightweight.
Incubators are sturdy double walled units.Inner chamber made of S.S. and outer made of Mild Steel with Powder coating.Double wall door with double glass window for observation in the chamber.Gap between the walls fitted with glass wool insulation to avoid heat loses.
Heating elements are made of high grade chrome plated nichrome wire.
Temp. is controlled by thermostat
Temp. Range 5 ºC Above ambient to 80º C and Accuracy: + 2 C.
Air Ventilations is provided on the top of the unit to remove the hot gases/fumes.
In Lab type Incubators heaters are placed in the bottom side of the unit.
All the control switches & pilot lamps are fitted on the front panel.
Designed specially biological Oxygen demand determination and other applications like general incubation, serum studies and enzyme assays tests. Castor wheel mounted cabinet is double walled. Inner chamber made of Aluminium / S. S. Outer chamber made of M.S. with powder coating. Full length inner glass / acrylic door permits inspection of Specimens.
Without disturbing the temperature. Temp. Controlled by Digital Temp. Controller cum indicator. Temperature range 5 C to 50 C with an accuracy of 0.5 C.
This unit is fitted with door operated illumination lamp inside the chamber. Equipped with hermetically sealed compressor. Air Circulation Fan for maintaining temp. Uniformity through out the chamber. Flush fitting insulated double walled door has magnetic gasket. The chamber is provided with modular removable shelves made of S. S. for complete flexibility is use. Inner chamber is fitted with refrigeration evaporator, heater and Air Circulator for creating positive Air flow through out the inner chamber for temp. uniformity. To work at 230V A. C. only.
Chambers size in mm
Inner Chambers sizes in mm H*D*W
Capacity in cu.ft.
Capacity (Aprrox.)
A
405 x 405 x 405(Bench Top Model)
2.4cu.ft
65ltrs
B
455 x 410 x 610
4 cu. Ft.
112 ltrs.
C
505 x 415 x 830
6.1 cu.ft.
171 ltrs.
D
565 x 565 x 865
10 cu. ft.
280 ltrs.
E
650 x 580 x 900
12 cu. ft.
336 ltrs.
F
700 x 650 x 900
15 cu. ft.
420 ltrs.
Optional:-
1
Timer
2
Co2 air mixer nozzle is provided
3
Microprocessor PID digital temp. Controller.
*NOTE:
Stabilizer 3-5Kva is recommended.
BTI-108 ORBITAL SHAKING INCUBATOR
Double walled construction. Outer chamber made out of mild steel finished in white stoving enamel/powder coated paint with mat finished colour combinations. Inner chamber made of stainless steel sheet. The double door is provided with double glass full view window. Interchangeable platform has been provided. Temperature range 5°C above ambient to 60° C ± 1° C is controlled by a digital controller. Variable speed control regulator controls the speed up to 200 rpm Supplied complete to work on 220V Ac 50Hz single phase. Capacity 16x500ml conical flasks.
Optional:-
1
Air circulating fan.
2
Timer
3
Microprocessor PID digital temp. Indicator
BTI-109 EGG INCUBATOR
Outer wall is made of M.S. sheet duly finished in white stoving enamel/powder coated paint with mat finished color combinations and inside of stainless steel. The gap between inner and outer wall is filled with high grade mineral glass wool. Temperature range from ambient to 70° C is controlled by thermostat with an accuracy of ± 0.5° C. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. supply.