It has a compact stirring device utilizing magnetic field (created by a PERMANENT MAGNET) which induces variable speed stirring action. Stirring is accomplished by means of small Teflon rotor, which when placed to be stirred is capable or rotation by magnetic field applied from below the container. The unit is fitted with pilot lamp. Works on 220/230 volts A.C.

The motor stirrer having maximum speed up to 4000 r.p.m. Unit is clamped to C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with 1/20 H.P. Regulator is fitted with S.S. stirrer rod to give smooth and noiseless operation.

Heavy & stable cast iron base duly painted with mild steel chrome plated upright provided with strong adjustable clamps to hold motor with stirring rod of stainless steel with Teflon grinder and clamp to hold tissue homogenizing vessel of borosilicate glass which is also adjustable. Speed variable through a control unit to work on 220V AC 50Hz single phase Motor used is of 1/20 H.P

Suitable for VDRL and others agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel/power coated paint. Tray type platform size 300x300 mm can take cavity slides, bottles flask etc; for shaking at a fixed speed by the help of spring wires. Standard fixed speed 180 RPM. An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220V AC 50Hz single phase.

The shaking machine has been fitted with D.C. MOTOR to work on 220 VOLT A/C 50 CYCLES smoothly for a longer period smoothly. Flasks mounted spindle to oscillate through small amplitude sturdy eccentric mechanism provides effective mechanical shaking. The shaking machine constructed to hold 100 ml to 1000 ml. conical flasks. The shaking speed action is controlled by ELECTRONIC regulator. 100 R.P.M TO 800 R.P.M approx.

D.C. MOTR SPECIAL SYSTEM SHAKER TO WORK ON 220 VOLT A.C. FOR VARIABLE AND SMOOTH FUNCTION SPEED CONTROL BY SPEED REGULATOR. It is general-purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and Kahn racks etc. Upper tray covered with rubber floor and sides of the tray are slotted to take parallel and cross bars cover with rubber to hold flasks, bottles beakers, Kahn racks etc. The bars are tightened with washers and fly nuts can be adjusted as per the requirement. cycles single phase (rates are without flasks, bottles, beakers Kahn racks)

Body made out of thick mild steel finished in stoving enamel/powder coated paint. Heavy duty motors of suitable capacities are provided for long duration operations. Fixed speed and variable speed models are offered. Platform is provided with rubber discs or stainless steel clamps to hold flasks. To work on 220V AC 50 Hz single phase. The choices available are: